OVERVIEW:

TestPro Automotive allows you to test the automotive wire harness while installed in the vehicle. This makes post-production line testing and troubleshooting, as well as service center troubleshooting much easier, than having to deploy a network analyzer and PC. TestPro offers a variety of hot swappable test adapters, for your specific testing needs.

KEY CAPABILITIES:

• Quick Pass / Fail Indication

• Distance to Fault

• Identify Cable Faults

• Miswires

• Open / Short

• Resistance

• Impedance

• Return Loss

• Savable and Printable Test Reports with the included TestDataPro software

DISTANCE TO FAULT:

An ideal differential network cable pair has a 100-ohm impedance along the entire length. In reality, the impedance varies from 100 ohms in different amounts along the cabling link, the deviation being more significant at the positions of connectors. The return Loss (RL) Locator plot provides a view of the cable along its length. The locations of peaks in the RL Locator are representative of spots with poor impedance control. When a cable fails autotest, the RL locator helps determine the TDR or distance to the fault location along the cabling link that is most likely to have caused the failure.

This is a great aid for troubleshooting. With accurate location information of the problem spot, a technician can focus on fixing the issue on that part of the cable, whether it is the result of:

Impedance mismatch in components (non-compliant or damaged cable, inadequate cabling installation practices, too much tension on cables, kinks or non-compliant connecting hardware/patch cords

Improper termination practices (pair twist not maintained, excessive cable sheath removal)

Incorrect or substandard components (all cable & connecting hardware must be of the same category/class/quality)

SPECIFICATIONS:

BATTERY:

• Lithium Ion

• 3.7v

• 13,200 mAh

• Approximate Test time : 8hrs (based on approximately 200 tests per day)

• Charging time: 7hrs

OPERATING SYSTEM:

• Linux

TEST DATA MANAGEMENT:

• TestDataPro PC Based Software

• TestDataPro Cloud

RJ45 TEST PORTS:

• AD-NETCABLE Test Adapter:

• Network Connectivity Testing

• PoE load testing

• 2.5G / 5G / 10G Multi-Gig Link speed testing

• CAT3 – CAT6A Channel

• Integrated RJ-45 side port:

• 10 / 100 / 1G BASE-T testing

DATA TRANSFERENCE:

• USB flash type A

• Micro USB

• USB cable

ADAPTER INTERFACE:

• 60-pin high-frequency connector

• Rated for 5000 insertion cycles

• Hot-swappable

POWER ADAPTER:

• 5V, 3A (supplied)

• 5-12V (supported)

• 2.1mm DC Jack

WARRANTY:

The test platforms carry a 2-year standard warranty for manufacturing defects and 1 year on adapters and accessories. Upon product registration, AEM will provide a 5-year warranty on the test platforms. Extended Care is available in 1 and 3-year programs and runs coincident with the standard warranty, to cover equipment damage outside the standard warranty, such as excessive drop damage, shattered display, water damage, etc. Extended Care also provides free adapter replacement if damaged once a year for each year of Extended Care. You can learn more about Extended Care in the Extended Care flyer found under the documents tab.

AEM TestPro Automotive

For More Information on the AEM MNNVNA Please Complete The Form Below